Pages: 4
C) Brainstorming D) Creative thinking 10 First fully
fimctional model of a design?
A) Idea 8) Design constrain 0) Prototype D) Design constrain

11 The amount of front wheel tilt measured Ln degrees from the vertical, is called

A)camber angle —_B)caster angle C)toe-in D)toe-out
12 Four-wheel drive vehicles have differential at
A)front wheels B)rear wheels

C)both the front and rear wheelsD)any of the front or rear wheels
3 The component Transaxle is
A)Front drive axle B)Rear dead axle
C)Combined differential and gear boxD)Differential housing
4 The arrangement in which road springs act as torque and thrust members is known as
A) Hotchkiss driveB)Torque tube drive
C)road spring driveD)none of the above

نم

نم

م

5 The torque at the driving wheels gives rise to a propulsive force between wheels and
road, known as
A)tractive forceB)driving effortC)braking thrustD)none of the above

ہے

6 Ina 6x4 tandem axle drive, vehicle will have:
A) no drive axle B) two drive axles at front C) one drive axle at rear D) two
drive axles at rear

نم

7 The transfer case is located next to the gearbox in:
A)Front wheel driveB)Rear wheel drive
C)Four wheel driveD)All of the above

18 Which type of clutch does not require clutch pedal?
A)Single plate B)Multi plate C)Cenffifugal D)Cone 19 wmich of
the following is true?
A)high torque is required at the start of the vehicle
B)low torque is required at high speeds
C)gearbox helps in smooth running of vehicle
D)all of iile above
20 The term DSG Stands for
A)Dual shift gear box B)Direct shift gear box C)Double
shift gear boxD)None of the above 21 The lubrication of
gearbox is done with:
A)SAE 20W40 011 (5۸40 oil C)SAE 90 oil D)SAE 120 oil 22 The
term FSP stands for:
A)Engine stability program B)Electronic — stability program C)Electronic
starting pulseD)Engine starting power
23 In a five speed gear box the approximate gear ratio on over drive is :

1: 10): 0.7 : 0.3
24 a slider crank chain, the numbers of possible inversions are
B) Four C)Five D)Six

25 Which one of the following is a spring controlled centrifugal governor
A)Hartnell governor B) Porter governor C)Proell
govemor D)Watt governor